MIL-STD 413C    
SIZE TOLERANCE    
       
Size Tol.      
       
Flash Extension/P.L. Projection Material Cross Section Max.  
  Less than 0.100" 0.003"  
  0.100" to 0.134" 0.003"  
  0.135" to 0.204" 0.004"  
  0.205" to 0.268" 0.005"  
  0.269 and over 0.006"  
       
       
       
Flash Thickness      
       
Off register/Mismatch Material Cross Section Max.  
  Less than 0.100" 0.003"   
  0.100" to 0.134" 0.004"  
  0.135" to 0.204" 0.005"  
  0.205" to 0.268" 0.006"  
  0.269 and over 0.006"  
       
       
       
Combined Flash, Offset and Parting Line Projection      
       
       
       
       
       
       
       
DEFECT TOLERANCE    
  MIL-STD 413C
       
Flats      
       
Backrind   Maximum Acceptable Dim.
  Material Cross Section Depth Width
  Less than 0.100" 0 0
  0.100" to 0.134" 0.003" 0.005"
  0.135" to 0.204" 0.004" 0.006"
  0.205" to 0.268" 0.004" 0.006"
  0.269 and over 0.005" 0.010'
       
       
P.L. Indentation   Maximum Acceptable Dim.
  Material Cross Section Depth Width
  Less than 0.100" 0.003" 0.010"
  0.100" to 0.134" 0.003" 0.015"
  0.135" to 0.204" 0.004" 0.020"
  0.205" to 0.268" 0.005" 0.025"
  0.269 and over 0.006" 0.030'
       
       
Foreign Material   Maximum Acceptable Dim.
  Material Cross Section Depth Width
  Less than 0.100" 0 0
  0.100" to 0.134" 0.003" 0.005"
  0.135" to 0.204" 0.004" 0.007"
  0.205" to 0.268" 0.005" 0.010"
  0.269 and over 0.006" 0.015"
       
       
Inclusions      
(depression left from foreign material)      
       
       
       
       
       
       
       
Indentations      
       
       
       
       
       
       
       
       
Non Fill   Maximum Acceptable Dim.
  Material Cross Section Depth Width
  Less than 0.100" 0 0
  0.100" to 0.134" 0.002" 0.010"
  0.135" to 0.204" 0.003" 0.015"
  0.205" to 0.268" 0.003" 0.025"
  0.269 and over 0.003" 0.040"
       
       
Mold Deposit Defects   Maximum Acceptable Dim.
(Indentations)